We Care Solar - Solar Suitcase Installation Guide - 2017
Page | 34
Step 3: Install the Solar Suitcase on the wall
1. Remove the contents of the Solar Suitcase,
including the main control board (
Fig.1
).
2. Drill four holes in the back of the Solar Suitcase
outside of where the main control board will be
reattached (Fig.2).
3. Mark the wall where you will drill into the wall.
•
Use two people to mark the wall.
•
Make sure the Solar Suitcase doesn’t move
during marking
– if not the holes will not line
up.
•
Place a level on top of the Solar Suitcase to
make sure the Solar Suitcase is even.
4. Set the first plastic anchor:
•
Drill holes 4 centimeters deep into the wall.
•
Insert the anchors into the holes all the way
into the wall.
5. Attach the suitcase to the wall and mark the other
3 holes.
•
Use the level to keep it straight (
Fig.3
).
6. Take down the Solar Suitcase and place the
remaining 3 plastic anchors.
7. Permanently install the Solar Suitcase to the wall
with the LARGER hex-head screws.
8. Put the main control board back into the Solar
Suitcase.
9. Cut grey plug so that it can wrap around the wires
entering the Solar Suitcase and push it back into
the hole to keep dust out.
Remove all the contents of Solar
Suitcase
Be sure to drill the holes outside of
where the main control board will go.
Use the level to keep it straight
