MagiCube User Manual
WeAre3D.ca
Copyright 2015 We Are 3D Inc.
Page 9
1.
Filament entrance – This is where the filament is pulled into the print head.
2.
Nozzle – This is attached to the print head, which extrudes the filament and places it into position while
printer is operating.
3.
Filament – This is the material that will build the object. The 130mm spool that is included with the
printer mounts to the rear door. Optional larger spools are available that will mount on a separate
spool holder.
4.
Print bed – This the surface on which the printed object will stand. It can be removed from the printer
easily to allow the finished part to be detached after completion.
5.
Print bed carriage – This holds the print bed in place, and moves it back and forth during the print.
6.
LCD screen – Displays the printer menus and the status of current print.
7.
Interface control button– Can be rotated and pressed to navigate the menus.
8.
Power input – The MagiCube power supply plugs in here.
9.
USB port – This port can be used to connect with a computer.
10.
microSD (TF) slot – A microSD card can be inserted here to print without a computer (preferred).
2.6.
Safety
High Temperatures
Warning: The MagiCube generates high temperatures at the print head. Never reach into the print area
while the printer is in operation. Always allow the printer to cool down before reaching anywhere near the print
head. Keep combustible or flammable materials away from the print head and the print surface.
Pinch Points
Warning: The MagiCube includes moving parts that can cause injury. While printing, filament, print head,
and print bed will be in motion. Keep the enclosure free of hands, clothing, hair, jewellery, and any other
objects when the printer is on.
Ventilation
Caution: During its operation the MagiCube melts plastic, which can release odours. Ensure the printer is
operated in a well-ventilated area.
Electrical
Caution: Maintain easy and clear access to electrical connections, and do not overload electrical supplies. In
case of emergency, disconnect the MagiCube power supply from the wall socket.
Safety Enclosure
Caution: To meet safety regulations, the printer must be operated with the safety enclosure installed.
Summary of Contents for MagiCube
Page 1: ...User Manual Rev A ...
