4. Measure the radio
’
s RSSI using one of the following methods:
•
With an HHT or PC (see
Section 4.0, TRANSCEIVER PROGRAM-
MING
on
Page 15
).
•
With MDS Radio Configuration Software (see
Section 6.5,
Upgrading the Radio
’
s Software
on
Page 40
).
•
With a voltmeter connected to Pin 21 of the
DATA INTERFACE
connector (See
Section 3.2, RSSI Measurement
on
Page 14
).
5. With a non-metallic adjustment tool, adjust each section of the
helical filters for maximum RSSI. Re-install the cover to the trans-
ceiver.
ײª·-·¾´» °´¿½» ¸±´¼»®
Figure 12. Helical Filter Locations
6.3 Performing Network-Wide Remote Diagnostics
Diagnostics data from a remote radio can be obtained by connecting a
laptop or personal computer running InSite NMS software to
any radio in the network.
Figure 13
shows an example of a setup for per-
forming network-wide remote diagnostics.
FRONT PANEL
OF RADIO
J301
U104
U101
U202
ØÛÔ×ÝßÔ
ßÜÖËÍÌÓÛÒÌÍ
U203
SHIELD
COVER
05-3305A01, Rev. E 37
Summary of Contents for 1710 Series
Page 55: ...05 3305A01 Rev E 47 NOTES...
Page 56: ...48 05 3305A01 Rev E...
