www.wdmpumps.com
38
PI Operation Manual
Figure 6.27 Placing the lockwasher on both couple halves.
Figure 6.26 Placing the second half of the coupling in the shaft.
27.
Place the lockwasher on both couple halves, making sure that the screwholes match.
A lever (eg., a bar) should be used to lift the rotor, supported in the adapter and
pressing against the bottom face of the half coupling, in order to hold it in its position once the rotor
has been correctly matched in the half coupling, while performing the next steps.
26.
Place the second half of the coupling in the shaft.
