WCP GreyT Shooter User Manual Download Page 47

Page: 47 / 48

GreyT Shooter (7")- User Guide

(Rev 1)

Page 47

GreyT Shooter (7")- User Guide (Rev 1)

wcproducts.com

FAQ

Q: What wheels are recommended?

A: The WCP Solid Roller Wheels or 4” Flex Wheels are the recommended wheel to use.

Q: What size game objects does the shooter support?

A: This GreyT Shooter was designed with a 7” game object in mind. Other sizes may be

used but the performance may vary as smaller or larger game objects were not taken

into consideration.

Trouble Shooting

Issue: Not shooting far enough�

Possible Solutions:

1. The RPM may not be high enough. Try increasing the RPM to gain for distance.

2. The compression on the game object is not enough. Try increasing the compres-

sion by moving the standoffs that support the plastic hood backing forward to the

next set of holes.

Summary of Contents for GreyT Shooter

















































Search results

Summary of Contents for GreyT Shooter

Reviews:

Related manuals for GreyT Shooter

Brands by name

Popular brands

WCP GreyT Shooter, User Manual

Search results

Summary of Contents for GreyT Shooter

Reviews:

Related manuals for GreyT Shooter

Brands by name

Popular brands