WCC EF Series, Owner'S Manual, Page: 14 / 28

An Employee-Owned Company
Commercial Water Softener
Startup Procedures
(TECHNICIAN TO INITIAL EACH ITEM SUCCESSFULLY TESTED.)
Installation Verification
1.
☐
Confirm the system O&M manual is onsite.
2.
☐
Confirm 120 VAC power supplied.
3.
☐
Verify water lines are all properly plumbed, and water is available.
4.
☐
Verify drain lines properly plumbed.
5.
☐
Verify meter(s) plumbed in correct direction.
6.
☐
Verify brine reclamation properly plumbed (if applicable).
7.
☐
Verify salt is available onsite
8.
☐
Bypass installed? Yes
☐
No
☐
Master Bypass
☐
Each Valve
☐
9.
☐
Water test kit provided to end user (only if specified).
10.
☐
Fully photographed system and system plumbing.
Pre-Startup
1.
☐
Install brine line tubing.
2.
☐
Install meter cables.
Date _______________________________________________________________________________________________________________________
Project Name/Location _______________________________________________________________________________________________________
Technician __________________________________________________________________________________________________________________
Model/Serial Number _________________________________________________________________________________________________________
Number/Size of Resin Tanks ___________________________________________________________________________________________________
Size of Brine Tank ____________________________________________________________________________________________________________
Brine Reclaim System ________________________________________________________________________________________________________
☐ Meter ☐ Timeclock ☐ Progressive Flow ☐ Alternating
WCC STARTUP PROCEDURES | PAGE 1/3