WCC EF Series, Owner'S Manual, Page: 11 / 28

Setting Time of Day
Push
NEXT
until time of day screen is displayed. Press and hold until
SET TIME
is dis-
played and the hour flashes once. Press or until the correct hour is displayed.
Then press
NEXT.
The minutes will flash. Press or until the correct minute is dis-
played. Press
NEXT
to return to the User Display.
Typical Installer Programming
1: Press the “ NEXT ” and simultaneously for
≈
3 seconds.
2: Use up and down arrow buttons to set HARDNESS to the actual compensated hardness then press “ NEXT ”
3: Use up and down arrow buttons to set REGEN DAY to 21 (or desired alternate) then press “ NEXT ”
4: Use up and down arrow buttons to set TIME REGEN to 2:00 AM (or desired alternate) then press “ NEXT ”
The main screen will now display the time of day. By pressing the NEXT button the screen can display the following
items.
Volume Remaining Until the Next Regeneration : Current Flow Rate : Totalizer : Time of Day
CK10EE, WS1EE & WS125EE Meter Softener Programming
Bypass Valve Operation