Step 3 – Attach equipment
Before attaching equipment, it is important to calculate the total load that you
will be placing on the rack mount surge. It is extremely important not to
exceed the rack mount surge's maximum current load (as outlined in the
Specifications section).
In order to determine your total load, simply add up the amperage of your
devices and ensure that it does not exceed the unit’s capacity.
Step 4 – Verify Protection
Protected
LED (Green)
Grounded
LED (Green)
Verify that both the Grounded and Protected LEDs are illuminated.
This means the rack mount surge is properly grounded and is protecting the
equipment from surges.
Rack mount surge
Outlets do not provide
power to connected
equipment
Reset Breaker check if plug is
completely connected. If the
problem remains contact
ADI/W Box Technologies US
1-800-233-6261; Canada
877-234-7378; PR 787-793-8830
1. Open breaker
2. Loose power cord
Troubleshooting
Protected LED is
not illuminated
Surge protection is
exhausted.
Circuit breaker has
tripped
1. Sustained overload
2. Excessive ambient or
internal temperatures.
3. Faulty breaker
Grounded LED is
not illuminated
Ground circuit is open.
Check the site ground. If the site
ground is good the rack mount
surge may be faulty. contact ADI/W
Box Technologies US
1-800-233-6261; Canada
877-234-7378; PR 787-793-8830
Contact ADI/W Box Technologies
US 1-800-233-6261; Canada
877-234-7378; PR 787-793-8830
Reset Breaker.
If the problem remains contact
ADI/W Box Technologies US
1-800-233-6261; Canada
877-234-7378; PR 787-793-8830
Possible Cause
Problem
Solution
COPYRIGHT © 2020 ADI
4
