Package Contents
User Manual
Bracket Mounting
Screws M4 X 6
(4pcs)
Cord Retention Tray
Mounting Screws
M3 X 6 (4pcs)
Ground Screw
M4 X 6 (1 pcs)
Rackmount Surge Unit (1)
Cord Retention Tray (1)
Horizontal Installation
Used (1 set)
Vertical Installation
Used (1 set)
Cable Tie
(15 pcs)
for Cord Retention Tray
Safety Precautions -
Read the following before installing or operating
the Rack Mount Surge:
1. ONLY use the supplied hardware to attach the mounting brackets.
2. The rack mount surge must only be plugged into a three-wire, grounded
outlet on a circuit protected by a fuse or circuit breaker. Connection to any
other type of power outlet may result in a shock hazard.
3. Do not use extension cords or adapters with this rack mount surge.
4. Never install the rack mount surge, or associated wiring or equipment,
during a lightning storm.
5. Ensure that the power cord, plug, and socket are in good condition.
6. This device features an internal protection that will disconnect the surge
protective component at the end of its useful life but will maintain power to
the load - now unprotected. If this situation is undesirable for the
application, follow the manufacturer's instructions for replacing the device.
7.
CAUTION!
Do not install this device if there is not at least 10meters (30
feet) or more of wire between the electrical outlet and the electrical service
panel.
8.
CAUTION!
To prevent the risk of fire or electric shock, this rack mount
surge should be installed in a temperature and humidity controlled indoor
area free of conductive contaminants. Do not install this rack mount surge
where excessive moisture or heat is present.
Check
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts please contact
ADI/W Box Technologies US
1-800-233-6261; Canada
877-234-7378; PR 787-793-8830
Rack
Mount
Surge
User’s
Manual
COPYRIGHT © 2020 ADI
1
