wayscral Kickway L1, Manual

Page: 75 / 256

75
I. Cleaning
• Check that the power supply and charging cable of the Kickway
L1 scooter have been disconnected.
• Clean your Kickway L1 scooter with a soft, dry cloth.
WARNING!
•
Your Kickway L1 scooter is IPX4 certified. This means
that it is protected from splashes. However, it should not be
immersed in or sprayed with water. Therefore, never clean the
Kickway L1 scooter with high-pressure water jets or immerse it
in any liquid.
• Do not allow water or other liquids to enter into the Kickway L1
scooter, as this may cause irreversible damage to the electronic
components.
•
Your product would then be excluded from the warranty.
• Cleaning and user maintenance of the scooter must not be
carried out by children without supervision.
• Never use alcohol, gasoline or any other corrosive chemical to
clean your scooter. This could seriously damage the appearance
and structure of your scooter.
II. Maintenance
General recommendations
• Do not make any modifications that are not specified by the
manufacturer.
• Contact an approved workshop, such as Norauto/ATU/Auto 5.
Wheel and brake system maintenance:
•
Remember to apply lubricating oil regularly to both ends of the
brake cable to ensure its long life and proper functioning.
•
Check the front and rear wheels and hub carefully before using
the scooter. The wheels must not be damaged or punctured.
•
Check the brake carefully before using the scooter.
• In the event of a problem, contact the after-sales service to have
the wheels replaced.