background image

F u n c i o n a m i e n t o

( C o n t i n u a c i ó n )

• Bajo condiciones de inundación, la

bomba se apaga por 1 segundo
cada 16 segundos y vuelve a
encenderse automáticamente.

5 . No ponga la bomba en

funcionamiento a menos que
e s t é sumergida en agua.
E l funcionamiento en seco causa
daños a la bomba.

6 . El motor está equipado con un

protector térmico de reposición
automática. 

7 . Mientras la bomba esté drenando

e l pozo, verifique que la tubería de
descarga esté llevando el agua hacia
un punto bastante alejado de la
c i m e n t a c i ó n .

8 . Si la tubería de descarga de la

bomba queda expuesta a
temperaturas de congelamiento,
l a tubería expuesta debe inclinarse
para que drene. El agua que esté
dentro de la bomba puede
congelarse y dañar la bomba.

M a n t e n i m i e n t o

Siempre 
desconecte la

fuente de electricidad antes de intentar
instalar, efectuar un servicio, reubicar o
realizar cualquier tipo de
mantenimiento. Si la fuente de energía
está fuera de la vista, tránquela y
etiquétela en la posición abierta (off)
para evitar que se aplique corriente en
forma inesperada. Si no lo hace puede
provocar un choque eléctrico mortal.
Esta unidad debe ser reparada
únicamente por electricistas calificados.
La reparación incorrecta podría provocar
un choque eléctrico mortal.

1 . Deje que la bomba se enfríe por no

menos de dos horas antes de dar
servicio puesto que la bomba
contiene aceite caliente bajo presión
y el motor está caliente.

2 . Desensamblar el motor antes del

vencimiento de la garantía anulará
la misma. Si se necesitan
reparaciones, vea la tabla de
solución de problemas.

3 . La entrada de agua debe

mantenerse limpia y libre de
cualquier objeto extraño y debe
inspeccionarse anualmente. Si se
atasca la entrada la bomba se daña.

4 . Es necesario verificar

mensualmente el funcionamiento
correcto de la bomba. Es posible
verificar que la bomba funcione
correctamente desconectando
brevemente el cordón de
alimentación de la bomba de la
parte de atrás del sensor de agua
y enchufándolo directamente en el
tomacorriente conectado a tierra.
Bajo estas condiciones, la bomba
trabaja en forma continua. Una vez
comprobado el funcionamiento de
la bomba, vuelva a enchufar el
cordón de alimentación de la
bomba en la parte de atrás del
enchufe del sensor de agua
( v e r Figura 2).

5 . Limpie regularmente la superficie

del sensor de agua para impedir
que depósitos de sedimento u otros
materiales se acumulen en la
superficie del sensor (ver Figura 2).

Esta bomba 
contiene aceite

dieléctrico para su enfriamiento. Este
aceite puede ser dañino para el medio
ambiente. Verifique las leyes
ambientales de su estado antes de
desechar este aceite.

1 5- S p

CDUCAP Series

Operating Instructions And Parts Manual

6

w w w .waynepumps. c o m

Limited Warranty

For five (5) years (Models CDUCAP725 and CDUCAP850) and lifetime warranty (Models CDUCAP995 and
CDUCAP1000) from the date of purchase, Wayne Water Systems will repair or replace, at its option, for the
original purchaser any part or parts of its Sump Pumps or Water Pumps (“Product”) found upon examination
by Wayne Water Systems to be defective in materials or workmanship.  Please call Wayne Water Systems (1-
800-237-0987) for instructions or see your dealer.  Be prepared to provide the model number when exercising
this warranty.  All transportation charges on Products or parts submitted for repair or replacement must be
paid by purchaser.

This Limited Warranty does NOT cover Products which have been damaged as a result of accident, abuse,
misuse, neglect, improper installation, improper maintenance, or failure to operate in accordance with Wayne
Water Systems’s written instructions.

THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO FIVE (5) YEARS
(CDUCAP725 and CDUCAP850) AND LIFETIME WARRANTY (MODELS CDUCAP995 and CDUCAP1000)
FROM THE DATE OF PURCHASE. THIS IS THE EXCLUSIVE REMEDY AND ANY LIABILITY FOR ANY AND
ALL INDIRECT OR CONSEQUENTIAL DAMAGES OR EXPENSES WHATSOEVER IS EXCLUDED.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusions or
limitations of incidental or consequential damages, so the above limitations might not apply to you.  This
limited warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state.

In no event, whether as a result of breach of contract warranty, tort (including negligence) or otherwise, shall
Wayne Water Systems or its suppliers be liable for any special, consequential, incidental or penal damages
including, but not limited to loss of profit or revenues, loss of use of the products or any associated
equipment, damage to associated equipment, cost of capital, cost of substitute products, facilities, services or
replacement power, downtime costs, or claims of buyer’s customers for such damages.

You 

MUST

retain your purchase receipt along with this form.  In the event you need to exercise a warranty

claim, you 

MUST

send a 

copy

of the purchase receipt along with the material or correspondence.  Please call

Wayne Water Systems (1-800-237-0987) for return authorization and instructions.

DO NOT MAIL THIS FORM TO WAYNE WATER SYSTEMS.

Use this form only to maintain your records.

MODEL NO.  ____________________     

SERIAL NO.  ____________________

INSTALLATION DATE  ____________________

ATTACH YOUR RECEIPT HERE

Summary of Contents for Submersible Sump Pump CDUCAP Series











Reviews: