26
920943 Rev E July 2014
6.7 Register
The register manufacturer recommends that the register should be cleaned and lubricated
once per year or after every 250,000 units (gallons or liters) delivered, whichever occurs
first. For proper cleaning, the register should be removed from the dispenser, and thus
cleaning should be performed by an authorized service technician and according to the
register manufacturer’s instructions.
Make sure power to the dispenser is turned off before lubricating the register. Failure to do so
may result in a hazardous condition that can result in serious injury.
Basic lubrication can be performed without removing the register from the dispenser. Oil the
points as shown in Figures 6-2, 6-3, and 6-4. The manufacturer recommends Chemlube 201
Synthetic Oil, Exxon Instrument Oil, Aeroshell Fluid No. 12, Mobil 1, or equivalent oil with a
temperature range of -65
0
F to +400
0
F.
Beveled gears may be greased with Vischem 352, Beacon 325, Aeroshell No. 14, or
equivalent grease with a temperature range of -40
0
F to +300
0
F. A light film of grease should
also be applied to all gear teeth in the variator section.
Figure 6-2 Register (right side)
Lubrication
Points
Figure 6-3 Register (left side)
Lubrication
Points
WARNING
Summary of Contents for Reliance G6101D
