WayFinder V7000, Operation Manual

Page: 19 / 44

17
4. If you drive with your headlights and
stereo on, turn these on prior to
calibration.
Calibrating the unit
To begin calibration, press to toggle
through the programming options until
“
CALIb
” and “
SEt
” display on screen.
1. Press .
“
PrESS StEP to StArt
” displays.
If is pressed now, the unit returns to
normal display.
2. Press .
“
turn ONCE PrESS Ent to End
” displays.
Turn vehicle in one complete circle in either
direction. Circle size does not matter. Take
at least 20 seconds to complete the circle.
3. Press .
“
dONE
” flashes once, and the unit returns to
normal display mode. If the degree symbol
on line 2 flashes after calibration, repeat
the calibration process. A flashing degree
symbol indicates magnetic distortion. See
the Frequently Asked Question section for
more information.
PROGRAMMING AND OPERATION