Waxess DM1200E User Manual Download Page 58

Page: 58 / 86

D Mode CT User Guide

Remember that the corded handset and the
speakerphone on the base cannot be used at the
same time.

Call waiting with two calls

While a call is in progress (as in the above
example) and the landline (TEL) receives
another call,

Call waiting

appears in the display

and any other cordless handsets not in use will
ring.

To answer the call, press

FLASH/DEL

on the base,

TEL

on any handset not in use.

If the new call comes in on a different line,
press the appropriate key (CEL or TEL)
regardless of whether you are using the base or
a handset.

•Barge-in

After placing a landline (TEL) call with a cordless
handset, this feature allows up to three other
registered cordless handsets to join the call. Before
using the Barge-In feature, read the following
information.

• The D-Mode CT comes with the Barge-In feature

set to off–it must be activated before use.

• If power to the base is interrupted, Barge-In must

be reactivated.

• The first cordless handset to place the call is the

D mode EVDO draft 1.book Page 52 Friday, January 12, 2007 8:18 PM

Summary of Contents for DM1200E



















































































Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands

Waxess DM1200E, User Manual

Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands