Waxess DM1200E User Manual Download Page 18

Page: 18 / 86

D Mode CT User Guide

Press

EXIT

to return to the main menu screen.

OR
Press

EXIT

twice or

OFF

to return to Standby.

The following steps apply to both the base and the
handset.

•Time and date

The time and date automatically synchronizes with
the cellular network once when the base is powered
on (if supported by your service provider). The
time and date do not automatically synchronize
with the network afterward and must be set
manually.

Press

MENU

Use the / keys and scroll to

Time and Date

Press

Select

A cursor blinks on the hour
number.

Use the keypad to enter the
correct hour.

The cursor moves to the right for the minute
numbers.

Enter the correct minutes, and press

The AM/PM screen appears.

Use the

key to set AM or PM and press

D mode EVDO draft 1.book Page 12 Friday, January 12, 2007 8:18 PM

Summary of Contents for DM1200E



















































































Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands

Waxess DM1200E, User Manual

Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands