Waxess DM1200E User Manual Download Page 45

Page: 45 / 86

GO!

D Mode CT User Guide

SEND A NEW MESSAGE

Write a message, then press

Send

Edit

, and

Save

appear.

Scroll to

Send

, and press

Select

Recipient No.?

appears.

Enter the phone number of the recipient and
press

To send a message to a number that is stored
in the phone book, press

MENU

, scroll to the

entry you want, and press

Select

Note:

Verify that the CEL line is not in use

before sending the message.

A confirmation message appears. Then, the
SMS menu appears. Press

EXIT

to return to the

SMS main menu.

To save the message before exiting, follow the
steps in “Save a new message.”

The message is stored in Saved messages for
easy viewing later.
OR
Press

to exit.

SAVE A NEW MESSAGE

After writing a message, press

Scroll to Save, and press

Select

The message is stored in Saved messages for
easy viewing later. Press

EXIT

to return to the

SMS main menu.

D mode EVDO draft 1.book Page 39 Friday, January 12, 2007 8:18 PM

Summary of Contents for DM1200E



















































































Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands

Waxess DM1200E, User Manual

Search results

Summary of Contents for DM1200E

Reviews:

Related manuals for DM1200E

Brands by name

Popular brands