4-9
FIGURE 4-4: Scan Mode
Scan Measurement includes sub-menus for Level and Tilt, each
with adjustments for Freq and limits.
•
If Tilt compensation is ON, you will see a small version of the tilt
icon at in the top center of the screen, and at the bottom-center
of the screen
Tilt Comp (value
).
•
Immediately below the graph numerical values are displayed.
The basic display shows the following information:
•
Channel
number
•
Video carrier frequency and level (numerical)
•
Audio carrier frequency and level (numerical)
•
Histogram graph of carrier levels
•
Delta between audio and video levels
•
Selected channel plan
•
Test point compensation (appears only if a non-zero value)
is programmed during setup)
•
Limits annunciator (If out-of-tolerance conditions exist)