54
55
be included in averages.
ACTIONS:
If you feel symptoms such
as weakness, sweating, nervousness, headache or confusion,
follow your healthcare professional’s recommendations. If
you get a Lo glucose test result but have no symptoms of low
blood glucose, then retest with a new WaveSense Jazz Test
Strip. If you still get a Lo test result, follow your healthcare
professional’s recommendations.
HI MESSAGE:
Flashing message, with double beep (if
volume is ON).
MEANING:
Glucose test result is above 600 mg/dL. This Hi re-
sult may indicate hyperglycemia (high blood glucose). The Hi
result is stored in the memory with time and date. It will not
be included in averages.
ACTIONS:
If you feel symptoms such
as fatigue, thirst, excessive urination, or blurry vision, follow
your healthcare professional’s recommendations. If you get
a Hi glucose test result but have no symptoms of high blood
glucose, then retest with a new WaveSense Jazz Test Strip. If
you still get a Hi glucose test result, follow your healthcare
professional’s recommendations. Checking ketones may be
advisable.
HYPOGLYCEMIC WARNING ALARM:
Flashing
message with the time.
Test result flashes, with
double beep (if volume is ON).
MEANING:
If the Hypoglycemic Warning Alarm is set, your
glucose test result is lower than the pre-set threshold.
CAUTION: Low or high blood glucose test results can
indicate a potentially serious medical condition. Follow
your healthcare professional’s recommendations.
The ADA (American Diabetes Association) recommends the
following target ranges for adults with Diabetes:
- Pre-Prandial Plasma Glucose: 90-130 mg/dL
- Post-Prandial Plasma Glucose: < 180 mg/dL
Always consult your healthcare professional for your
recommended target ranges.
LO MESSAGE:
Flashing message, with double beep
(if volume is enabled).
MEANING:
Glucose test result is lower than 20 mg/dL. This Lo
result may indicate hypoglycemia (low blood glucose). The Lo
result is stored in the memory with time and date. It will not
Display Messages
20
CHAP
T
E
R
available (located on the test strip vial).
[2]
CAUSE:
Sample applied after meter times out and
deactivates.
ACTION:
Repeat the test using a new WaveSense
Jazz Test Strip. Wait until you see the blood and test strip
symbols on the display before you apply the blood sample.
[3]
CAUSE:
Sample not applied to the tip of the test strip.
ACTION:
Repeat the test using a new WaveSense Jazz Test
Strip.
[4]
CAUSE:
Defective meter.
ACTION:
Call customer service
and have the meter serial number available (located on the
back of the meter.
Summary of Contents for jazz
Page 1: ...OWNER S GUIDE ...
Page 34: ......
