WaveSense jazz Oweners Manual Download Page 2

Page: 2 / 34

24-Hour Customer Service:

+1 (866) 906 4197

In case of emergency, contact your healthcare professional or
emergency medical response.

Manufacturer:

AgaMatrix, Inc.
10 Manor Parkway
Salem, NH 03079 USA

©2005-2008 AgaMatrix, Inc. 10 Manor Parkway, Salem, NH 03079 USA
Meter Firmware ©2005-2008 AgaMatrix, Inc.
US and International Patents Pending. All rights reserved. All trademarks and copyrights
are the property of their respective owners.

8100-03542 Rev C

Key Features in the WaveSense Jazz™

No Coding Required

- The WaveSense Jazz doesn’t

require you to code your meter. Insert a test strip and
you are ready to test.

Pre/Post Tagging

- After you test, tag your reading

with the mealtime. Better organize your data and see
how your test results change before and after meals.

Positive Feedback

- In addition to a highly accurate

result, the WaveSense Jazz will also display a smiley
face icon if your result is within the target range.

Large Digits

- The WaveSense Jazz has the world’s

largest digits when compared to the blood glucose
monitors produced by the leading brands.

Summary of Contents for jazz



































Search results

Summary of Contents for jazz

Reviews:

Related manuals for jazz

Brands by name

Popular brands

WaveSense jazz, Oweners Manual

Search results

Summary of Contents for jazz

Reviews:

Related manuals for jazz

Brands by name

Popular brands