MDMX Overdrive
MDMX Distortion Modules / User Guide
27
M
ID OR
S
IDE
M
ODE
I
NPUT
L
EVEL CONTROL
When the Input section is set to Mid or Side, this knob controls the input level of the M or S signal, independent of the
plugin input. A letter following “Input” identifies whether M or S is being controlled. When Stereo input is selected, this
control is grayed out.
Range: -24 dB to +24 dB
Default: 0 dB
Shaper Section
G
AIN
Controls the amount of overdrive introduced to the signal.
Range: 0 dB to 16 dB
T
YPE
There are two models for generating overdrive, built around different
waveform shapes. The effect varies depending on other settings, but in
most cases, this control strongly influences the basic sound. Try the both
of them.
W
AVEFORM
The display next to the Gain knob illustrates the waveform associated with
the selected Type.
HD
O
N
/O
FF
(On) enables x8 up-sampling of the output signal. With low resolution files,
low and high frequency parts of a signal tend to collapse, and compression
can be perceived as edgy. Up-sampling provides more room to these parts
of the signal and can result in a more pleasant sound. When HQ is Off, you
can get a grittier sound in low-level signals.
