:
APCD-WM001-1.0
viii
Preface
Conventions
The following conventions are used throughout this document:
WARNING!
Whenever you see this icon and heading, the associated text
addresses or discusses a critical safety or regulatory issue.
CAUTION:
Whenever you see this icon and heading, the
associated text discusses an issue, which, if not followed, could
result in damage to, or improper use of, the equipment or
software.
TIP:
Whenever you see this icon and heading, the associated
text provides a tip for facilitating the installation, testing, or
operation of the equipment or software.
Regulatory Notices
This device has been designed to operate with only the antenna types listed in this manual.
This device has been tested using unshielded Ethernet CAT-5 cable.
There can be no modications made to the MMT9000 or its antennas without the express
permission of WaveRider. Failure to comply may void the user’s authority to operate this
equipment in accordance with FCC regulations.
Federal Communications Commission
The MMT9000 has been designed and manufactured to comply with FCC Part 15.
Operators must be familiar with the requirements of the FCC Part 15 Regulations prior
to operating any link using this equipment. For installations outside the United States,
contact local authorities for applicable regulations.
The FCC ID for the MMT9000 equipment is OOX-MMT9000.
The transmitter of this device complies with Part 15.247 of the FCC Rules.
