:
APCD-WM001-1.0
xi
8. Operate the MMT9000 only from a 13.8 VDC (+-/25%) power supply, such as a
standard vehicle power system. Using other voltages, such as 24 VDC or AC power,
can result in damage to the MMT9000.
9. Use the fuse assembly provided to protect the MMT9000 from power surges in the
vehicle power system as well as protecting the power system from short circuits in the
MMT9000 or its power cable.
10. Route the Power-supply cable, Ethernet cable and Antenna cable so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cord and cables at their plugs, convenience receptacles and the
points where the cords exit the equipment.
11. Provide strain relief for cables near their connections. This is typically done by leaving
a loop in the cable near the connection.
12. Do not locate the MMT9000 in the vicinity of power lines or other electric light or power
circuits, or where it can fall onto such power lines or circuits.
13. For added protection during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug the MMT9000. This will power down the MMT9000.
14. Never push foreign objects of any kind through openings (e.g. Ethernet jack) in this
wireless product as they may short-out parts that could result in a fire or electric shock
and damage the unit.
15. The MMT9000 is a rugged unit that can tolerate a wide range of environments if
installed correctly, but it is not rated as being submersible nor immune to all liquids
from all directions. If the MMT9000 may experience rain, then mount the unit so that
the rain does not fall on or drip directly onto the connector endplate.
16. Do not attempt to service this wireless product yourself. Refer all servicing to qualified
service personnel.
17. Unplug the unit and refer servicing to qualified service personnel under the following
conditions:
•
When the power supply cord or plug is damaged.
•
If the MMT9000 does not operate normally for an extended period of time when
following the operating instructions. Note that it is possible that Internet traffic can
be slow even under normal operations due to network congestion and radio
interference and fading and not as result of problems with the MMT9000.
•
When the MMT9000 exhibits distinct changes in performance. This may indicate a
need for service.
18. When replacement parts are required, be sure the service technician has used
replacement parts specified by WaveRider or with the same characteristics as the
original part. Improper substitutions may result in fire, electric shock or other hazards.
19. Upon completion of any service or repairs to this wireless product, ask the service
technician to perform safety checks to determine that the wireless product is in proper
operating condition.
