Installation Reference
5000 Mobile Terminal Product Guide (5000-REV2.21)
Chapter 8-77
In this connection, the Brown (DTR) wire should be not contacted, and the Purple (CTS) wire should
be looped back to the Blue (CTS) wire.
CONSOLE/SERIAL I/O CONNECTOR
The console connector used to interface to any WaveNet terminal console port is as follows:
Plug : FUJITSU FCN-230C020-A/E
Shield : FUJITSU FCN-237R020-G/G
The standard pin-out of the console/serial I/O connector is as follows:
Pin #
Name
Function
1
+12V
12V Power
2
Spkr Pwr
External Speaker/Microphone Power
3
+5V
5V Power
4
+5V
5V Power
5
GND
Ground
6
TXD1
Transmit Data 1 (External)
7
RTS1
Request to Send 1 (External)
8
RXD1
Receive Data 1 (External)
9
CTS1
Clear To Send 1 (External)
10
DCD1
Data Carrier Detect 1 (External)
11
TCLK1
Transmit Clock 1 (External)
12
RCLK1
Receive Clock 1 (External)
13
GND
Ground
14
SINAD
Radio SINAD Out (Radio Test Only)
15
CD
Carrier Detect Out (Radio Test Only)
16
RSSI
Receive Signal Strength Indicator (Radio Test Only)
17
TXD2
Transmit Data 2 (Console)
18
RXD2
Receive Data 2 (Console)
19
Mic (In)
External Microphone Audio In
20
Spkr (Out) External Speaker Audio Out
TYPICAL EXTERNAL CONSOLE & DEVICE CABLE CONNECTIONS
The following shows a simple, typical cable connection for an external RS-232 device (assuming a
DB9F Connector):
Pin #
Name
Function
External Device Pin #
Function
5
GND
Ground
5
Ground
6
TXD1 Transmit Data 1 (External)
2
RXD
