ANATEL CK70 Manual Download

Page: 1 / 20

CK70, CK71 Mobile Computer Compliance Insert

Models 1001CP01, 1001CP01U, 1001CP01U-H1

General and Safety Related Information for all Regions

Product documentation is available at www.honeywellaidc.com.

Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other
than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this
product and may result in the loss of the user’s authority to operate the equipment.

Battery and Power Supply Information

802.11 Radio Precaution Statement

Radiation Exposure Statement

If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide 1.50 cm (0.59 in) space between the
device and the body.
Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposure beyond the limits
established for this equipment.

For Users in the U.S.A. and Canada

Scan Engine and Camera Flash Compliance and Precautions

This product is registered with the CDRH (21 CFR Subchapter J, Part 1040).
When the EX25 scan engine is installed, the device is a Class I laser product.
When the EA30 or N5603 scan engine is installed, the device is a Class II laser product with a maximum output of 1 mW at 630-680 nm.

Note: There are no controls or adjustments provided for routine operation or maintenance of the product. There are no user-serviceable parts inside
this product.

Model: 1001CP01

Model: 1001CP01U

Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future
reference.

Caution: For use with Intermec battery pack Model 1001AB01 only. See battery instructions. For power supply, use Intermec Model
9001AE02 or Model 9002AX02. No user-serviceable parts.
Charge only in Intermec Models 1001CP01, 1001CP01U or 1001CP01U-H1 or with bases 1002UU01, 1002UU02, 1002UU03,
1002UU04, or 1002UU05 using 1002UC02 or 1002UD02 adapters. Use of incorrect charger may present a risk of fire or explosion.
Promptly dispose of used battery pack according to the instructions.

A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual.

Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal
Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for
Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation.

Caution: Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser
light exposure.

Model 1001CP01

Complies with
IDA Standards

DA 102905

ertified for use in Hong Kong

OFTA

Certificate No. HK003 11 00013

Certificate No. HK003 11 000012

Model 1001CP01

ertified for use in Hong Kong

OFTA

Certificate No. HK003 11 00024

Certificate No. HK003 11 000023