Using the Presentation Manager
5000 Mobile Terminal Product Guide (5000-REV2.21)
Chapter 4-26
??
F3
- Only full screen operation is allowed, and menu password protection is available.
The configuration security level of the active window is indicated on the Status Bar. The square
appearing at the left of the radio gauges contains the current security level number.
To assign a configuration security level to a selected window, use the procedure:
1) Touch the Tasks menu bar item.
2) Touch the applicable window menu item.
3) Touch the <F2> key.
4) Touch the <F1> or <F2 > or <F3 > key for level 1or 2 or 3.
5) Touch the <ENTER> key.
See also, the section on Hot Keys, in Chapter 3.
Ensure that the menu password is also assigned (see previous section on Window Menus, in this
chapter).
TOUCH SCREEN CALIBRATION
The resistive or capacitive touch membrane covering the display surface may be calibrated for position
accuracy. This procedure is not required on a regular basis and should only be undertaken if you are
certain the calibration has drifted over time. Reasons for it drifting may include exposure to extremes
of temperature or an extended shelf life where the pre-set calibration has been lost.
Checking for Calibration
Place your finger or other object in the case of resistive screens on the touch screen. A cursor should
appear underneath if the screen is in calibration. If not the cursor will appear offset somewhere else on
the screen.
