WAVECONTROL SMP2 User Manual Download Page 20

Page: 20 / 97

• Battery:

battery charge level.

• Probe information:

serial number of the field probe attached to the apparatus

and its frequency information.

Measurement information:

• Logging and average parameters:

Average window time.

Average type (sliding or tumbling).

Sampling rate.

Logging time.

Field information:

(updated twice per second)

The

SMP2

has a double screen display. Depending on the probe selected, you

have the RMS and Peak values or RMS and Average values.

• Total field:

instantaneous total field level.

Obtained for three-axis probes as:

•

The quadratic sum of each axis field (for field intensity units):

•

The quadratic sum of each axis field (for field intensity units):

• Field unit:

unit of measurement of the field value shown on the display.

This unit applies to the total field, the field on each axis and the maximum,

minimum and average values.

Battery

discharged

Battery

charging

Battery

fully charged

User’s Manual

Electromagnetic Field Meter SMP2

Summary of Contents for SMP2


































































































Search results

Summary of Contents for SMP2

Reviews:

Brands by name

Popular brands

WAVECONTROL SMP2, User Manual

Search results

Summary of Contents for SMP2

Reviews:

Brands by name

Popular brands