Wavecom WISMO Pac P5100 Series, User Manual

Page: 14 / 42

E
RROR
! R
EFERENCE SOURCE NOT
FOUND
. P5186 U
SER
M
ANUAL
V 1.0
Error! Reference source not found.
3 Connector description
3.1 WISMO Pac P5186 signals
Some of the WISMO Pac P5186 interface signals mentioned hereafter are multiplexed in order to
limit the number of pins.
For further information about the WISMO Pac P5186 signals and multiplexing, refer to document [2]
WISMO Pac P5186 module Product Technical Specification
Ref.: WM_PRJ_P5100_PTS_001.
3.2 J100 connector
J100 is a HE10 50-pin male connector.
Pin number Signal name
I/O I/O type Description Comment
1, 2 GND Ground
3, 4 VBATT I/O Battery voltage High current.
5, 6 GND Ground .
7 AUX_ADC I Analog Auxiliary ADC input
8 BAT_TEMP I Analog ADC input for battery
temperature measurement
9, 10 GND Ground .
11 SPK_N O Analog Main speaker
negative output
12 SPK_P O Analog Main speaker
positive output
13 SPK_AUX_P O Analog Auxiliary speaker
positive output
14 SPK_AUX_N O Analog Auxiliary speaker
negative output
15 MIC_N I Analog Main microphone
negative input
16 MIC_P I Analog Main microphone
positive input
17 MIC_AUX_P I Analog Auxiliary microphone
positive input
18 MIC_AUX_N I Analog Auxiliary microphone
negative input
19, 20 GND Ground
21 VIBRATOR O Analog Vibrator output Iout = 80 mA max
Vout = 2.8 V max.
confidential ©
Page :
14 / 42
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.