E
RROR
! R
EFERENCE SOURCE NOT
FOUND
.
P5186 U
SER
M
ANUAL
V 1.0
Error! Reference source not found.
4 Operating
configuration
The operating configuration is made using the SW200 switch.
1
2 3
4
5
6
7
8
Jumper Function Position
Configuration
mode
Description
1
Normal
DVCC supplied from J200
(VBATT)
Red
DVCC* power
supply consumption
measurement
2
Measurement
DVCC supplied from J201
(5V current source)
3
Normal
Charger input (CHG_IN)
connected to J201
(5 V current source)
Yellow
Charger input
management
4
Measurement
Charger input (CHG_IN)
disconnected
5
Normal
Shutdown inactive
Green
RS232 Serial link
transceiver
shutdown
management
6
shutdown
Shutdown active
7
Modem
SIM card presence is
managed (SIM_PRES
supplied by V-core)
Blue
SIM card presence
management
(SIM_PRES**
signal)
8
Mobile
SIM card presence is not
managed (SIM_PRES not
supplied)
* DVCC is an internal digital power supply (3 V typical) mainly used as the RS232 interface power
supply.
** SIM_PRES: SIM card presence is detected via the GPIO3 of the WISMO module.
The
default configuration
(called “modem configuration”) of the
SW200
switch is
1, 3 , 5
and
7
:
Red jumper on position
1
,
Yellow jumper on position
3
,
Green jumper on position
5
,
Blue jumper on position
7
.
confidential ©
Page :
31 / 42
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.