background image

Wavecom Instruments Portable Appliance Testers Instruction Manual

 

 

 

 

Competent Person 

To ensure that all electrical equipment or devices are inspected, tested and tagged correctly, regulations require 
that a 

‘competent person’ such as a Licensed Electrician be employed to perform the required tests. 

Please refer to the above definition as described in the current 

AS/NZ-3760:2010

 

Standard

 and in addition, to 

any other local legislation or jurisdictions as may be relevant in your State. 

EXAMPLE: 

A person competent to undertake Inspection and Testing of electrical equipment must have:  

 

Knowledge and practical experience of electricity and its hazards.

 

 

A clear understanding of precautions to avoid danger.

 

 

The ability to recognise at all times whether or not it is safe for work to continue. 

 

 

The ability to carry out visual examinations of electrical equipment. 

 

 

The  ability  to  distinguish  between  electrical  equipment  that  is  double  insulated  and  equipment  that  is 
earthed as well as being able to identify the appropriate test for each type. 

 

 

The competency to safely carry out the Earthing Continuity, Insulation Resistance or Leakage Test and 
RCD tests on electrical equipment. 

 

 

The  knowledge  of  how  to  use  the  relevant  testing  instruments,  interpret  and  record  the  results  for 
compliance with the Standard/Workplace requirements. 

 

 

The knowledge to be able to correctly recommend the frequency of testing required. 

 

Due  to  the  potential  hazards  of  electrical  testing,  due  care  must  be 

taken  at  all 

times.

 

Disclaimer 

Limited Warranty   

The Manufacturer warrants its products against defects in materials and workmanship for a period of 12 months 
from the date of purchase.  During the warranty period, the manufacturer will repair (or at its option replace at no 
charge) the product that proves to be defective.  This warranty does not apply if the product has been damaged 
by  accident,  abuse,  misuse  or  mis-application  or  as  a  result  of  service  or  modification  by  anyone  other  than 
manufacturer of the TnT.

 

The  TnT  product  range  of  devices  or  its  manufacturer  IS  NOT  RESPONSIBLE  FOR  INCIDENTAL  OR 
CONSEQUENTIAL  DAMAGES  RESULTING  FROM  THE  BREACH  OF  ANY  EXPRESS  OR  IMPLIED 
WARRANTY,  INCLUDING  DAMAGE  TO  PROPERTY  AND  TO  THE  EXTENT  PERMITTED  BY  LAW,  and 
DAMAGES FOR PERSONAL INJURY. The Distributors of this product cannot assume liability or responsibility for 
any loss or damage resulting from the use of this device.

 

The TnT manufacturer reserves the right to discontinue models, change 

specification, price 

or design, at any time without notice or obligation.

 

 

 
 
 
 
 

 

Summary of Contents for TnT ELB G4-Series

























Reviews: