Wavecom Q2686 Technical Specifications Download Page 84

Page: 84 / 99

Page: 83 / 97

This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior
written agreement.

WM_PRJ_Q2686_PTS_001-010

June 30, 2009

Q2686 Wireless CPU

4.4

Conformance with ATEX 94/9/CE directive

To evaluate the conformity of the final product with ATEX 94/9/CE directive the
following datas must be taken into account:

•

Sum of all capacitors

: 84

•

Sum of all inductances

: 12

4.5

Mechanical Specifications

4.5.1

Physical Characteristics

The Q2686 Wireless CPU

has a complete self-contained shield.

•

Overall dimensions : 32.2x40x4 mm (except shielding pins)

•

Weight

: <10 g

4.5.2

Mechanical Drawings

The mechanical specifications of the Q2686 Wireless CPU

are shown in the

following page.

Summary of Contents for Q2686




































































































Search results

Summary of Contents for Q2686

Reviews:

Related manuals for Q2686

Brands by name

Popular brands

Wavecom Q2686, Technical Specifications

Search results

Summary of Contents for Q2686

Reviews:

Related manuals for Q2686

Brands by name

Popular brands