manualshive.com logo in svg

wattstopper LP Series, Installation & Wiring Reference

Share
Download
wattstopper LP Series Installation & Wiring Reference Download Page 12

ORDERING INFORMATION – STANDARD CONFIGURATIONS

Catalog No .  Description of Lighting Control Panel

  LP8S-4-115  

Surface-mount cover, 4 relay; 115/277VAC

  LP8F-4-115 

Flush-mount cover, 4 relay; 115/277VAC

  LP8S-8-115  

Surface-mount cover, 8 relay; 115/277VAC

  LP8S-8-240 

Surface-mount cover, 8 relay; 240VAC

  LP8S-8-347  

Surface-mount cover, 8 relay; 115/347VAC

  LP8S-8G-115 

Surface-mount cover, 8 relay, Group switch card; 115/277VAC

  LP8S-8G-240 

Surface-mount cover, 8 relay, Group switch card; 240VAC

  LP8S-8G-347 

Surface-mount cover, 8 relay, Group switch card; 115/347VAC

  LP8F-8-115 

Flush-mount cover, 8 relay; 115/277VAC

  LP8F-8-240 

Flush-mount cover, 8 relay; 240VAC

  LP8F-8-347 

Flush-mount cover, 8 relay; 115/347VAC 

  LP8F-8G-115 

Flush-mount cover, 8 relay; 115/277VAC

  LP8F-8G-240 

Flush-mount cover, 8 relay, Group switch card; 240VAC

  LP8F-8G-347 

Flush-mount cover, 8 relay, Group switch card; 115/347VAC

Optional system equipment

  EM-24A2 

Low voltage exterior photocell

  AS-100* 

Automatic control switch; 120/277VAC; 50/60Hz

  LVS-1* 

Standard momentary toggle switch

  RS2-3x* 

Two button low voltage momentary switch

  L1S* 

Single button low voltage architectural design toggle switch

  LxS* 

Multi-button low voltage architectural design toggle switch

  DCC2* 

Low voltage momentary switch, Miro Decorator style with LED

* Multiple options available, such as color, lighted/unlighted, keyed, number of buttons, etc. Consult Watt 

Stopper/Legrand Product Selection Guide for details.

WARRANTY INFORMATION

Watt Stopper/Legrand warranties its products to be free of defects in materials and workmanship for 

a period of one (1) year. There are no obligations or liabilities on the part of Watt Stopper/Legrand for 

consequential damages arising out of, or in connection with, the use or performance of this product or 

other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or 

reinstallation.

2800 De La Cruz Boulevard, Santa Clara, CA 95050 

Technical Support: 800.879.8585 

www.wattstopper.com 

09853r2  12/2014

Please 

Recycle

Summary of Contents for LP Series













Reviews:

No comments

Brands by name

Popular brands

Load more brands