User Manual
51
3) Remove the seal and lead the cable through the cable gland.
Note:
The communication between the meter/BMS and inverter is the RJ45 interface cable. The
communication cable of the meter is 10M, and the line of BMS is 3M.
4.7.2 Connect the Meter and BMS communication cables
Open side
1) Thread the RJ45 plug of appropriate length through the swivel nut, and insert it into the open side of the rubber
gasket.
2) Insert one side of the RJ45 plug into the RJ45 port of terminal block.
3) Insert another side of the communication cable into the meter RS485 port or BMS CAN port.