● If the signal quality is insufficient: move the original antenna out of the cabinet; use
an RF extension cord with a SMA connector up to 2 1 adhesive support to
hold the antenna.
● If the signal quality is still insufficient: use a High-gain antenna with a maximum of
10 meters of cable; this antenna can for example be used outside or in other floors
to obtain the best signal quality.
For each sensor, follow these steps:
1.
Add the sensor to the user console (available at
) by
naming it to be identifiable.
2. Save and send the configuration to the Box.
3. Activate the sensor; to do this, use the manufacturer’s technical documentation.
4. Check on the user console that the sensor is detected.
34
2022-05 V1.4
