8
Device 1
Device 2
Remarks
Put the device in RF pairing mode (10s). By pressing
for 5 seconds, the
controller goes in RF pairing menu.
By using
and
select zone 3
(Red led), press
to enter in Pairing
with a slave device mode.
All LEDs are blinking green.
When link is completed, WFC-03 HC
RF returns to the RF pairing menu and
WFC-03 HCM RF 230 returns to normal
mode.
5. System configuration
The WFC-03 HCM RF 230 should be always paired to a WFC-03 HC RF controller, even if you are using a BT-CT02 RF.
There is always only one WFC-03 HCM RF 230 per installation.
BT-D03 RF
WFC-03 HC RF
WFC-03 HCM RF 230
BT-A03 RF
