OMM-0153_E
• 5/11/2023 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 65 of 124
CENTURION Installation, Operation & Maintenance Manual
SECTION 7: MAINTENANCE
7.2 Igniter-Injector
The ignitor-injector should be
inspected
annually and
replaced
at least every 24 months of
operation, sooner if there is evidence of substantial erosion or carbon build-up. Parts and
instructions are included in the CEN 2000/1600 12 Month (P/N
58025-25)
and 24 Month (P/N
58025-26
and
58025-27
) Maintenance Kits.
The igniter-injector may be hot; therefore, care should be exercised to avoid burns. It is easier to
remove the igniter-injector from the unit after the unit has cooled to room temperature. To
inspect/replace the Igniter:
Figure 7-1: Igniter-Injector & Flame Detector
Note that during installation, use the number of indexing (clocking) washers necessary that,
when tight, the gas injection tube is positioned as shown below.
Figure 7-2: Igniter-Injector Orientation
