OMM-0153_E
• 5/11/2023 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 32 of 124
CENTURION Installation, Operation & Maintenance Manual
SECTION 3: EDGE CONTROLLER OPERATION
SECTION 3:
EDGE CONTROLLER OPERATION
This section provides a brief outline of how to gain access to the Water Heater
’s Edge Controller
functionality. Full instructions for using the Edge Controller to setup, configure and operate a
Centurion Water Heater are included in the
Edge Controller Manual
(OMM-0161).
The Edge Controller is shown below. This panel contains all of the controls, indicators and
displays necessary to operate, adjust and troubleshoot the Water Heater.
The Edge Controlle
r’s front panel consists of a touchscreen display along with a variety of
indicators and buttons.
Figure 3-1: Edge Controller Front Panel
1
Multi-Function Bar shows either:
•
Fire Rate
•
Valve Position
2
Parameter Indicator for both
temperature read-outs:
•
LEFT: Inlet or Setpoint temperature
•
RIGHT: Outlet or System Header
temperature
3
Temperature scale indicator: Fahrenheit
or Celsius
4
Configurable temperature read-outs (2):
•
LEFT: Inlet or Setpoint temperature
•
RIGHT: Outlet or System Header
temperature
5
Operation Mode Indicators (2):
•
LEFT: Demand or Manual
•
RIGHT:
Manager
or
Client
(WHM only)
6
Edge Controller Touchscreen
7
Soft Keys
8
Preventive Maintenance
9
Ready Light
10
Enable/Disable Switch
11
Low Water Level Buttons (2):
•
TEST
: Initiates Low Water test
•
RESET
: Resets unit after Low Water
test
