Watts PVI Aqua Solve Family, Installation Manual

Page: 10 / 16

12
Controller Features / Options
RECHARGE NOW
At times of greater than normal water use, such as
when you have guests, you could run out of condi-
tioned water before the next scheduled recharge. If
this happens, you may want to initiate an immediate
regeneration, as follows:
1 . Press the RECHARGE button and hold for 3 sec-
onds, until the words “RECHARGE NOW” flash in
the display.
The softener enters the fill cycle of regeneration
immediately. “RECHARGE NOW” will flash during
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
NOTE: If the “Clean Feature” is set ON, the normal
regeneration cycle is preceded by a cleaning
backwash and rinse.
RECHARGE TONIGHT
If you do not want to start an immediate recharge, but
would like an extra recharge at the next preset
recharge start time, do the following to schedule a
recharge:
1 . Press and release (do not hold) the RECHARGE
button.
The words “RECHARGE TONIGHT" flash in the dis-
play, and the softener will recharge at the next preset
recharge time (If you decide to cancel the regenera-
tion before it begins, press and release the
RECHARGE button once more, and “RECHARGE
TONIGHT” will disappear from the display). During
regeneration, the words “RECHARGE NOW" will flash
in the screen. When completed, full water condition-
ing capacity is restored.
RECHARGE NOW initiated
FIG. 24
RECHARGE TONIGHT initiated
FIG. 25
12
Controller Features / Options
RECHARGE NOW
At times of greater than normal water use, such as
when you have guests, you could run out of condi-
tioned water before the next scheduled recharge. If
this happens, you may want to initiate an immediate
regeneration, as follows:
1 . Press the RECHARGE button and hold for 3 sec-
onds, until the words “RECHARGE NOW” flash in
the display.
The softener enters the fill cycle of regeneration
immediately. “RECHARGE NOW” will flash during
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
NOTE: If the “Clean Feature” is set ON, the normal
regeneration cycle is preceded by a cleaning
backwash and rinse.
RECHARGE TONIGHT
If you do not want to start an immediate recharge, but
would like an extra recharge at the next preset
recharge start time, do the following to schedule a
recharge:
1 . Press and release (do not hold) the RECHARGE
button.
The words “RECHARGE TONIGHT" flash in the dis-
play, and the softener will recharge at the next preset
recharge time (If you decide to cancel the regenera-
tion before it begins, press and release the
RECHARGE button once more, and “RECHARGE
TONIGHT” will disappear from the display). During
regeneration, the words “RECHARGE NOW" will flash
in the screen. When completed, full water condition-
ing capacity is restored.
RECHARGE NOW initiated
FIG. 24
RECHARGE TONIGHT initiated
FIG. 25
RECHARGE NOW
At times of greater than normal water use, such
as when you have guests, you could run out of
conditioned water before the next scheduled recharge.
If this happens, you may want to initiate an immediate
regeneration, as follows:
1. Press the RECHARGE button and hold for 3
seconds, until the words “RECHARGE NOW”
flash in the display.
The softener enters the fill cycle of regeneration
immediately. “RECHARGE NOW” will flash during
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
NOTE: If the “Clean Feature” is set ON, the normal
regeneration cycle is preceded by a cleaning
backwash and rinse.
The words “RECHARGE TONIGHT” flash in the
display, and the softener will recharge at the next
preset recharge time (If you decide to cancel the
regeneration before it begins, press and release the
RECHARGE button once more, and “RECHARGE
TONIGHT” will disappear from the display). During
regeneration, the words “RECHARGE NOW” will
flash in the screen. When completed, full water
conditioning capacity is restored.
12
Controller Features / Options
RECHARGE NOW
At times of greater than normal water use, such as
when you have guests, you could run out of condi-
tioned water before the next scheduled recharge. If
this happens, you may want to initiate an immediate
regeneration, as follows:
1 . Press the RECHARGE button and hold for 3 sec-
onds, until the words “RECHARGE NOW” flash in
the display.
The softener enters the fill cycle of regeneration
immediately. “RECHARGE NOW” will flash during
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
NOTE: If the “Clean Feature” is set ON, the normal
regeneration cycle is preceded by a cleaning
backwash and rinse.
RECHARGE TONIGHT
If you do not want to start an immediate recharge, but
would like an extra recharge at the next preset
recharge start time, do the following to schedule a
recharge:
1 . Press and release (do not hold) the RECHARGE
button.
The words “RECHARGE TONIGHT" flash in the dis-
play, and the softener will recharge at the next preset
recharge time (If you decide to cancel the regenera-
tion before it begins, press and release the
RECHARGE button once more, and “RECHARGE
TONIGHT” will disappear from the display). During
regeneration, the words “RECHARGE NOW" will flash
in the screen. When completed, full water condition-
ing capacity is restored.
RECHARGE NOW initiated
FIG. 24
RECHARGE TONIGHT initiated
FIG. 25
RECHARGE TONIGHT
If you do not want to start an immediate recharge,
but would like an extra recharge at the next preset
recharge start time, do the following to schedule
a recharge:
1. Press and release (do not hold) the RECHARGE
button.
10