![background image](http://html.mh-extra.com/html/watts/pvi-aqs-14/pvi-aqs-14_installation-manual_877061013.webp)
20
Troubleshooting
RESETTING TO FACTORY DEFAULTS
To reset the electronic controller to its factory default
for all settings (time, hardness, etc.):
1.
Press the SELECT / MENU button and hold it until
the display changes twice to show the flashing
model code.
2.
Press the
p
UP button (a few times, if necessary)
to display a flashing “SoS”.
3.
Press the SELECT / MENU button, and the elec-
tronic controller will restart.
4.
Set the present time, hardness, etc., as described
in this manual
FIG. 49
20
Troubleshooting
RESETTING TO FACTORY DEFAULTS
To reset the electronic controller to its factory default
for all settings (time, hardness, etc.):
1.
Press the SELECT / MENU button and hold it until
the display changes twice to show the flashing
model code.
2.
Press the
p
UP button (a few times, if necessary)
to display a flashing “SoS”.
3.
Press the SELECT / MENU button, and the elec-
tronic controller will restart.
4.
Set the present time, hardness, etc., as described
in this manual
FIG. 49
RESETTING TO FACTORY DEFAULTS
To reset the electronic controller to its factory default for
all settings (time, hardness, etc.):
1. Press the SELECT/MENU button and hold it until
the display changes twice to show the flashing
model code.
2. Press the UP button (a few times, if necessary)
to display a flashing “SoS”.
3. Press the SELECT/MENU button, and the electronic
controller will restart.
4. Set the present time, hardness, etc., as described
in this manual
21
24 VAC
Transformer
Turbine
Sensor
OUT
GND
+5
Position
Switch
NO
NC
grn
brn
Valve
Motor
Back of Controller (PWA)
AC INPUT
POS. / TURBINE
MOTOR
J4
NOTE:
Connect optional chlorine
generator to terminal J4
(24V half-wave DC).
FIG. 50
Wiring Schematic
13
Summary of Contents for PVI AQS-14
Page 1: ...INSTALLATION MANUAL Aqua Solve Family AQS 9 Aqua Solve Large AQS 14 400498 05 15 ...
Page 14: ...14 NOTES ...
Page 15: ...NOTES 15 ...
Page 16: ......