OMM-LM8408_LM8410-COM_EN
Page 2 of 8
Technical Support
• (800) 433-5654 • Mon-Fri, 8 am - 5 pm CST
INTRODUCTION
The AquaSolve provides protection from scale for-
mation on internal plumbing surfaces. The AquaSolve
can be installed at the point of entry to a building to
treat both hot* and cold water, or it can be located
directly before a water heater, boiler, or other water
using device that requires protection from hard
water.
AquaSolve prevents scale by transforming the normal
dissolved hardness minerals into undissolved crys-
tal microparticles. These crystals stay suspended in
the water and have a greatly reduced ability to react
and attach to surfaces like dissolved hardness does.
Therefore the problem of internal buildup of scale
in pipes, water heaters and on fixtures and glass is
greatly reduced.
AquaSolve is not a water softener or a chemical
additive (like antiscalants or sequestrants). It is a
scale prevention device with proven third party lab-
oratory test data and years of successful residential
and commercial installations. AquaSolve is the one
water treatment device that effectively provides scale
protection and is a great saltfree alternative to water
softening (ion exchange) or scale sequestering chem-
icals. Laundry and warewashing chemistry will like-
wise require adjustments.
Lync AquaSolve Benefits
• Chemical-free scale prevention and protection –
converts hardness minerals to harmless, inactive
microscopic crystals making AquaSolve an effec-
tive alternative technology to a water softener for
the prevention of scale due to water hardness
• Virtually maintenance free – no control valve
• Uses environmentally friendly technology by
using no salt or other chemicals to constantly
add, no electricity and no wastewater
• Improves efficiency of all water using appliances
– both hot* and cold
• Simple sizing and installation – all you need to
know is pipe size and the peak flow rate
• Safe for landscaping and lawn watering
No need for costly bypass plumbing
• Compatible with all on-site and community
wastewater treatment systems
• Perfect system for towns or communities where
water softeners are banned or restricted
• For high-flow applications**, install multiple tanks
in parallel
• AquaSolve does not remove minerals or add
sodium to the water supply
• AquaSolve can be installed as pre-treatment to
commercial reverse osmosis systems (contact
your Lync representative for details)
*For hot water applications where feed water temperature is 100° -
140°F (38° - 60°C), please contact Lync Systems Engineering.
**For high-flow applications, contact your Lync Representative
for details on larger, multi-tank systems plumbed in parallel that
can meet high flow applications from 100 gpm to and above 1000
gpm.
The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system.
WARNING
Systems are certified through WQA against
NSF/ANSI/CAN Standard 61, CSAB483.1, and
to NSF/ANSI 372 for Lead Free compliance.
Operation & Maintenance Manual
Lync AquaSolve
