![background image](http://html.mh-extra.com/html/watts/hs-200-pt/hs-200-pt_installation-instructions-manual_876898009.webp)
Customer Service Toll Free Hot Line: 888-774-7405
1725 W. Williams Dr. C-20
Phoenix, AZ 85027
HS-200 Quarterly PM Maintenance Procedure:
Remove Front Panel
Figure 1
Remove 3 prefilters
Figure 2
Remove Calcite feeder
Figure 3
1.
Remove eight screws from front panel (figure 1). Remove front panel,
2.
Unscrew first stage sediment filter by grasping and turning counter clockwise
(Figure 2) (No need to turn off incoming water source) discard, unscrew remaining
filters and discard.
3.
Install new filters by removing yellow cap (figure 3).on top and inserting each
filter into corresponding element head. Insure all filters are hand tight and listen
for permeate pumps to begin pulsating, check for leaks
4.
Secure front panel.
A full one-year supply of filters is supplied with system upon installation. After one year
of service the HS-200 will need to have an annual PM kit ordered #61301605518 this kit
will include one full year supply of pre-filters and three replacement membranes.