background image

HKF20-IM-DE-W-UK-11-2020-Rev.0.1 | Part no. 10084531

© 2020 Watts

The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. 

Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice.” 

Warranty: All sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattswater.eu/gtc/ 

Watts hereby objects to any term, different from or additional to Watts terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts..

Watts Industries Deutschland GmbH

Godramsteiner Hauptstr. 167 • 76829 Landau • Deutschland

Tel. +49 6341 9656 0 • Fax +49 6341 9656 560

[email protected] • www.wattswater.de

9  Disposal

Potential contamination of the environment 
and groundwater due to improper disposal!

The regulations and guidelines of the 
legislature in the country of operation 
must be complied with when disposing of 
components and operating materials.

1.  Ensure that all subassemblies and components are 

de-energized.

2.  Professionally disassemble the pump group or commission 

a specialist company with this task.

3.  Sort the subassemblies and component parts into 

recyclable materials and operating materials.

4.  Dispose of the subassemblies and components according 

to regional laws and regulations or take them to be 
recycled.  

9.1  Return shipment to the manufacturer

Get in contact with the manufacturer if you would like to return 
the pump group or parts of it.

9.2  Reporting to administrative bodies and 

manufacturer

Inform the manufacturer about decommissioning and disposal 
of the pump group for statistical purposes.

10 

Guarantee

WATTS products are extensively tested. For this reason, 
WATTS only guarantees the replacement or – at the exclusive 
discretion of WATTS – free-of-charge repair of the components 
of the supplied products that, in the opinion of WATTS, 
have verifiable manufacturing faults. Warranty claims due 
to defects or defects of title can be invoked within one 
(1) year from delivery/transfer of risk. Excluded from the 
warranty are damages attributable to normal product wear 
or friction as well as damages as a result of modifications or 
non-authorized repairs on the products, for which WATTS 
rejects all claims for compensation (direct or indirect). (For 
more detailed information, please refer to our website.) All 
deliveries are subject to the General Terms and Conditions,  
which can be found on www.wattswater.eu/gtc/.

Summary of Contents for HKF20 Series













Reviews: