SmartPlate EV Installation, Operation and Maintenance Manual
CHAPTER 4
– ADJUSTMENT
OMM-0147_C
• SP-102 • 3/2/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
32
of
72
OVER-TEMPERATURE ALARM LIMIT ADJUSTMENT
Instructions
11. To exit the programming mode, press the
SET
and ▼ buttons simultaneously, or simply
wait one minute and the display will automatically exit the programming mode.
12.
Once the programming mode has been exited, the display will show the unit’s current
outlet water temperature.
Figure 4.3.2. Over-Temperature Switch
TABLE 4-2. Over-Temperature Switch Controls and Indicators
CONTROL or
INDICATOR
MEANING
FUNCTION
LED Display
TEMP
status
Displays current water temperature or
setpoint.
RST
RESET
button
Resets the unit after an alarm condition.
UP
button
Increases the displayed temperature.
DOWN
button
Decreases the displayed temperature.
SET
SET
button
Used to access and store parameters in the
unit.
