SmartPlate EV Installation, Operation and Maintenance Manual
CHAPTER 4
– ADJUSTMENT
OMM-0147_C
• SP-102 • 3/2/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
27
of
72
3-WAY CONTROL VALVE
INSTALLATION AND WIRING
Instructions
Figure 4.2.1-3. Control Valve Installation
6.
Connect the actuator’s Molex connector to the SmartPlate EV’s 3-circuit actuator
connector.
7. Ensure that
the valve’s DIP switches are in the positions shown below. The default setting
of all DIP switches is: 1 = ON, 2 = ON, 3 = ON, 4 = OFF.
Figure 4.2.1-4. DIP Switch Location and Settings
– Cover Removed
