Ufly Controller and BCM for Modulex EXT
CHAPTER 4: UFLY SETUP AND PROGRAMMING
OMM-0159_A_A
• 6/28/2022 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
28
of
83
4.1.3 Viewing the Boiler Setpoint
The setpoint temperature setting is viewed in the Heating Menu.
1. Access the
heating
menu from the Home Screen or from Main Menu.
Home Screen
Main Menu
If there is more than one heating circuit in the system:
4.2 Constant Set Point Mode
When a fixed header temperature is desired, configure the Constant Set Point Mode as shown
below. Follow these instructions to configure the controller for operation in the Indoor/Outdoor
Reset mode.
1. Access the
heating
menu from the Home Screen or from Main Menu.
Home Screen
Main Menu
2. If there is more than one heating circuit in the system, select the one to be setup
for constant setpoint.
ch ....
ch 13
ch13
Menu
Menu
Summary of Contents for AERCO EXT
Page 4: ......