Installation
Failure to follow all installation requirements risks possible death, personal injury,
property damage, and failure of the ADMS to perform as intended.
• Installation of ADMS MUST be performed by qualified technicians, including licensed electricians
and plumbers, following all manufacturer’s instructions, complying with all local, state, federal and
other governmental requirements, and with all building and construction codes and standards.
• Use ONLY with a potable water distribution system free of debris, foreign materials, corrosive
chemicals or substances, and other adverse conditions.
• ADMS is recommended for use as part of an ASSE compliant water distribution system, including
mixing valves and/or temperature limiting devices at all point-of-use fixtures (faucets, sinks, tubs,
showers, etc.).
• ADMS MUST be installed in a dry area not susceptible to freezing.
• Keep work area clean, well-lighted, free of clutter and distractions, and accessible only by
authorized personnel and workers.
• ADMS Control Module and touchscreen display must be located in accessible and well-lighted area
for use, servicing, repair or replacement by authorized personnel.
• ADMS Control Module is electrically powered. ALWAYS take proper precautions to recognize,
evaluate, and control electricity hazards during installation, programming, use and service/
maintenance.
WARNING
!
NOTICE
Installation of ADMS is performed by the owner using qualified and licensed trades such as plumbers
and electricians, following all local, state, federal and other governmental requirements, and all building
and construction codes and standards. Step-by-step installation instructions depend upon the applica-
tion and the configuration of the building’s water distribution system.
All installations require thorough flushing of all piping BEFORE installation, and testing for and eliminat-
ing all leaks before and after installation.
Check valves are recommended to prevent cross-flow.
OMM-0126-0A
Page 7 of 71