Wattbike ATOM NEXT GENERATION, User Manual

Page: 22 / 30

W
AT
TB
IK
E A
TO
M U
S
ER G
U
ID
E
22
REPLACING SHIFTER BATTERIES
Tools required:
A 1 bladed screwdriver
A CR2032 button cell battery
If the shifters on your Atom have stopped working the batteries may need replacing.
To replace the batteries:
1. Pull back and remove the rubber hood on the shifter to reveal the shifter.
TIP: Look on the inside (the side that faces the bike) to find the screw door.
2. Turn the screw door anti-clockwise to undo and remove.
3. Using a small flat bladed screwdriver carefully work the battery loose and remove.
4. Replace with the new battery with the positive side showing.
5. Replace the screw door and turn clockwise to secure.
6. Test the shifter by engaging the ‘Just Ride’ mode and testing the buttons.
PORTS
There are 2 ports on your Atom:
1. The USB port - this is used for diagnostics which are carried out at our service centre.
2. The power jack port, for plugging your Atom into the mains power.
WARNING Trip and fire hazard. Ensure power cable is stowed away after use.
Ensure the plug is fully inserted into the socket before use, check the socket
periodically for damage. There is a risk of fire if the socket is only partially
inserted and or the socket is damaged.