Wattbike ATOM NEXT GENERATION, User Manual

Page: 13 / 30

W
AT
TB
IK
E A
TO
M U
S
ER G
U
ID
E
13
CONNECT A HEART RATE MONITOR
WARNING Heart rate monitoring systems may be inaccurate.
Over exercising may result in serious injury or death. If you feel faint,
stop exercising immediately.
Your Atom can connect to Bluetooth™, ANTANT (SUUNTO), Polar and Wattbike heart rate belts.
They can be paired up in the Wattbike Hub before your session.
TIP: Wear your heart rate belt before trying to connect it to your Atom. You can also connect to
your heart rate belt during a session using the Wattbike Hub - simply tap the HR sensor in
the top right hand corner of the screen and select your belt.
1. Tap the play button to begin your session.
2. When finished, press the pause button then the stop button. The session will be saved and
uploaded to the Wattbike Hub (when an internet connection is available).
ATOM CONNECTIVITY METHODS
Straight out of the box, your Atom can connect to 3rd party training apps such as The Sufferfest,
Zwift and TrainerRoad.
The Atom allows control from apps with the following protocols:
1. ANT+ FE-C
2. Bluetooth Smart FTMS
Many apps have the ability to control resistance over the above protocols, which offer a smart
training experience.
If your chosen training app does not have the ability to control resistance based on on-screen
data, you can still record your session data via BLE or ANT+.
CONNECTING TO APPS
1. Plug your Atom into a wall outlet using the power adaptor provided. Ensure the switches on
both the wall outlet and the rear of the Atom are turned on.
2. Enable Bluetooth or ANT+ on your device.
3. Open your preferred training app and navigate to the point of connecting
your indoor trainer.
4. Select the displayed Atom ID. For example: ‘Atom02345’ or ‘02345’.
TIP: The digits correspond to the last 5 digits of the serial number of your Atom.
CONNECTING CYCLING COMPUTERS
To connect your Atom with your cycle computer:
1. Navigate to the ‘pair sensors’ or similar screen.
2. Depending how your device displays the sensor ID, select the displayed Atom sensor ID. For
example: ‘Atom02345’ or ‘02345’.
TIP: The digits correspond to the last 5 digits of the serial number of your Atom.
3. If you are prompted to confirm your selection, confirm to finalise the pairing process.