8
❑
Firmly push the plastic post in the front of the kite wing
mount into the hole in the corresponding plastic mount on
the kite wing assembly.
✦
✦
✦
✦
✦
IMPORTANT
✦
✦
✦
✦
✦
Make sure to push the post into the
hole completely, as shown.
❑
Line up the hole at the back of the kite wing mount with
the corresponding hole in the plastic mount on the kite wing
assembly.
❑
Secure the kite wing assembly to the kite wing mount,
using one small (6mm long) self-tapping screw and one flat
washer. Tighten the screw firmly, using the phillips head
screwdriver provided.
❑
Line up and secure the base of the two metal wires to
the corresponding hole in the back of the fuselage pod
assembly, using one large (11mm long) machine screw and
one flat washer. Tighten the screw firmly, using the phillips
head screwdriver provided.
✦
✦
✦
✦
✦
IMPORTANT
✦
✦
✦
✦
✦
When installed properly, the back of the kite wing mount should be in front of the plastic mount on the
kite wing assembly, as shown above. If it's not, the plastic post at the front of the kite wing mount is not pushed
completely into the corresponding hole on the kite wing assembly.
✦
✦
✦
✦
✦
IMPORTANT
✦
✦
✦
✦
✦
The hole in the base of the two wires is elongated. When threading the machine screw into place,
make sure to keep the slot centered.
Continued On Next Page
☛
☛
☛
☛
☛