6
PRO TIP
❑
Install 8 fresh AA Alkaline batteries, being careful to make
sure that the polarity is correct for each battery.
If you use rechargeable AA NiCD cells,
double-check to make sure that they are fully charged
before installing them into the transmitter.
Never attempt
to charge or recharge Alkaline cells.
❑
After double-checking that the batteries are installed
correctly, reinstall the battery cover, making sure it's firmly
seated into place.
❑
Carefully remove the battery cover from the front of the
transmitter by pulling down on it with one hand while
holding the transmitter with your other hand.
SECTION 4: ASSEMBLING YOUR WIND CRAFT RTF R/C KITE-PLANE
STEP 1: INSTALLING THE TRANSMITTER BATTERIES
Continued On Next Page
☛
☛
☛
☛
☛
STEP 2: OPENING THE KITE WING ASSEMBLY
❑
Lay out the kite wing assembly upside down and
carefully twist the carbon-fiber brace, so that it's
perpendicular to the carbon-fiber center brace.
