2
m-530dun-gb-01
13.3 Standard - 25 way D: Inputs and Outputs
23
13.4 Standard - 25 way D: power supply limits
30
13.5 N - Modules Standard and SCADA
30
13.6 Standard N - Module
31
13.7 SCADA N-Module
35
13.8 Standard - 9 way D - RS232 Use
37
14 Switching the pump on for the first time
41
14.1 Selecting the display language
41
14.2 First-time start-up defaults
42
15 Switching the pump on in subsequent power cycles
44
16 Mode menu
45
17 Manual
46
17.1 START
46
17.2 STOP
47
17.3 INCREASING AND DECREASING FLOW RATE
47
17.4 MAX FUNCTION (Manual mode only)
48
18 Flow calibration
49
18.1 Setting the flow calibration
49
19 Analog mode
52
19.1 Analog calibration
53
19.2 Calibrate Input 1
54
19.3 Setting a high signal
55
19.4 Setting high flow calibration
57
19.5 Setting a low signal
57
19.6 Setting low flow calibration
59
19.7 Calibrating the scaling input
60
19.8 Setting a high signal
62
19.9 Setting high flow calibration
63
19.10 Setting a low signal
63
19.11 Setting low flow calibration
64
20 Network mode
66
20.1 Network settings
66
20.2 Protocol
67
20.3 Pump No
67
20.4 Baud rate
67
20.5 Stop bits
67
20.6 Save network settings
68
